40k Tank Variant- Reaper Pattern Predator


So awhile ago I made the Stormraven Bellicose by adding Predator weapons to the Stormraven chassis. I also made a Datasheet for it, for use in non standard games of 40K.


This entry was posted in Blood Angels, Conversion Corner, Conversions, How To Guides. Bookmark the permalink.

Flashback Friday: Top Spikey Posts of 2012 #4

Welcome to Flashback Fridayswhere I dig deep for something cool that I have from back in the day, or a good post from way back (would you believe the blog is almost five years old)?

This month on Fridays, I’m going to countdown the top non- product related posts of the year for you all to enjoy once again.

Coming in at #4 is How To: Stormtalon Assault Walker Conversion
Original post below, enjoy -MBG

First off let me be the first to thank everyone for their overwhelming interest in this project.

This entry was posted in Best of 2012, Conversions, Space Marines, warhammer 40k. Bookmark the permalink.

How To: Stormtalon Assault Walker Conversion

First off let me be the first to thank everyone for their overwhelming interest in this project.

I can’t remember the last time a conversion I did was so well received. Heck this baby even ended up on the front page of the Warhammer Reddit for awhile!

This model’s official designation is the Stormhound Assault Walker after it’s bigger brother, the Warhound Titan.

I had alot of fun making this conversion, and hope this guide helps anyone out there looking to make their own version.

Unfortunately unlike a lot of my how to articles that try to help find alternatives to pricey kits and bits, this model is not cheap to make.

But I have a few tricks for you to help minimize what you need, and how to get some cash back out of your extras.

After Sixth Edition drops here shortly, I’ll be making a datasheet for this so it has a baseline, rules wise for Apocalypse or friendly games of 40k.

For now though it definitely usable as is, for a Stormtalon itself at the very least.

Parts List

Soulgrinder Kit (or a torso and front legs set from the defiler)
Optional Parts 
Whirlwind Rocket pods
Commander Chapter Symbols (for joint caps)
Dreadknight armor platings
GF9 Plastic Variety Pack (super convenient for pre-sized tubing)

It may be more econmoical to just buy the Dreadknight outright, than just ordering the bits.

Also since you have to destroy the Defiler torso for the couplers to use for the arms, (now legs) it may be worth it to buy a Soulgrinder instead of a Defiler. That way you can at least maybe resell or trade off the Soulgrinder upgrade sprue and recoup some cash.

It may also be a good idea to use the weapon pods that come with the Stormtalon instead of the Whirlwind Rocket Pods to save a little scratch as well.

The Conversion

First off I made the feet first. I think on projects like this it’s good to work from the “ground up”.  So I took the Dreadknight feet sheered them flat a bit and mounted the arm couplers I cut off the front of the defiler torso.

As you can see I glued one with the main support facing forward, and one backwards to help brace the leg assemble. The pose for the legs was striding, but if you want to make it just standing there you may not have to do that, as there will be no additional stresses on the feet besides gravity.

Next I went about assembling the legs. As you can see from the side shots, it’s a little intense. Lets break it down some.

First off I inverted the legs from the arm poses. Meaning the “claws” would be attaching to the hip of the Stormhound.

You have to actually trim the claws flush near their joint to make a mount to attach to the Dreadkight weapon bit that forms the hip. I also put a piece of plasticard across the two stubby claw halves to glue the DK Heavy Weapon Mount to. This allows the two claws to pivot together, forming a hip joint of sorts.

The rest of the hip joint is formed by adding tubing from the GF9 Variety pack to the two recess in the Lower Dreadknight Torso.

Picture shows the bottom of the torso, to which the legs are attached.

There is one piece of tubing in that pack that fits the holes in that torso, and perfectly fits over the nub on the weapon (now hip) mount and allows for perfect movement and support.

Now you should be have two legs and two feet, as well as a lower torso hip joint.  This assembly should be free standing at this point, so try our some poses before you glue the legs into their final positions.

I waited until the final positioning with the cockpit to attach the armor plates. While the legs are loose, now is a good time to de-spikey them, as there is quite a bit of chaos icons plastered all over these legs.

In place of the chaos stars on the joints you can use some of these Commander Chapter Symbols or even some of the small aquilas that come with the Stormtalon itself.

Cockpit Assembly

Assemble up the Stormtalon fuselage per normal and let dry.  After drying you can see from the picture where I cut down the rear of the cockpit. I had some help with this, as a friend was itching to lend a hand.  In hindsight I may have left just a little bit more of the fuselage on the back, as this assembly tends to lean forwards a tad. Lesson learned for my next one?

After you make your rear cut, patch up any openings with plastic card, and liquid green stuff (which is perfect for filling gaps like this).  I keep a small desktop fan around for projects that need quick drying so make sure to dry up any Green Stuff quick and then sand it flush.

I cut down one the thrusters from the main engine and attached that to the rear. I actually ended up going back and adding lead shot into the thruster hole to get it to balance better on the legs.

The front weapon mount had to go, as two sets of weapon pods would just not work.  I clipped off that mounting nub, and exposed the recess under it.  This is a great place to place a magnet for magnetizing any weapon options (or arms) you may desire.

Here are a few articles on magnetizing things if you need extra help there.

Then I assembled the Whirlwind rocket pods, and after cutting them down at the brackets shown, magentized them to the mounts for the engines. (you have to cut flush the engine axle that juts our from both sizes though).

I used that same diameter tube from the lower torso to form the swivel for left and right movement of the cockpit assembly as well. Just enlarge the “cross” opening for the flying stand enough to insert that tube, and trim flush at the base. The GF9 variety pack is neat because all of the pieces of tubing insert into each other, and can telescope outward if you wish.

We don’t need all that, just the piece that fits into the tube that was just placed and will attach down into the new lower torso assembly. Again the picture shows the bottom of the torso, to which the legs are attached. The middle tubing is for attaching to up into the cockpit.

You should now have a completed upper body assembly with weapon options.  Go ahead and play around with leg poses, and when you find something that works for you, glue it down and make it permanent.

I wouldn’t recommend gluing down the top to the legs however, keep that on a swivel for machine gun noise makings!

Checkout my video walk through and close up pictures below, and see how it stacks up to the “real” Stormtalon!

If you liked this conversion, check out Jkin’s Stormtalon Helicopter Conversion.  -MBG

This entry was posted in Conversions, How To Guides, Space Marines, warhammer 40k. Bookmark the permalink.

New 40k Tank Variant- Reaper Pattern Predator

So awhile ago I made the Stormraven Bellicose by adding Predator weapons to the Stormraven chassis. I also made a Datasheet for it, for use in non standard games of 40K.

I also fiddled around and added some Stormraven Weapons to a Predator to make a new lead-spitter called the Reaper.

I just found the model again in the closet of power, and decided to spruce it up a bit. Lets take a look!

Parts List

Stormraven Hurricane Bolters Set
Assembled Baal Predator
Optional Parts 
Smoke Launchers, Searchlight, Dozer Blade, etc….

The Hurricane bolter set is only a few bucks, making it a very affordable conversion.

The Conversion

Okay so this conversion is pretty straight forward, I just magnetized weapon to the sponson recess in the rhino chassis (that way I can switch it between normal predator weapons and this).

Just mount the magnets against the predator hatch leading to the interior compartment and you’re good.

Here are a few articles on magnetizing things if you need extra help there.

That’s pretty much it. I slapped the smoke launchers on top of the sponson mounts, but realistically I think there should be some sort of targeting reticule there.

I probably could have magnetized the targeter from the predator sponsons on top, but I think the launcher look works too.


I made up a datasheet for this new creation, so it can be run in friendly and Apocalypse games!

It is loosely based off a Baal Predator, with a few bonuses that seem to keep with the back story I made up.

You can download the rules PDF here on Google docs.

Check out the Reaper’s fluff below;

Recovering and maintaing the precious Stormraven is a huge task for the Techmarines of the Blood Angels Chapter of Space Marines. Already viewed with mistrust by the Adeptus Mechanius, these individuals are always out to prove their mettle. 

Recent events in sector13176 saw the destruction of many of these sacred warbirds. Preserving what they could from each downed aircraft the Tech-Marines stored their salvage and waited until they could avenge the loss of such noble machines.

When it was discovered that that campaign would require breaching multiple strongpoints simultaneously to afford the Great Devourer no time to sent a psychic distress call, the command elements of the Blood Angels called on the Techmarines to retrofit all Predators in sector with more firepower to lead the breaching actions.

Rising to the occcasion, Techmarines affixed Hurricane Bolters from the chapter’s downed Stormravens, and destroyed Land Raiders to all operational Predators. Sacrificing speed for shots down range, the Techmarines rigged the tanks to hurl more shells provided they did not move at full speed, allowing some of the tanks to pour shots into the breaches, as the rest sped past.

And thus the Reaper Pattern was born. The Adeptus Mechanicus has requested the plans to this new variant, and to date have not received a response….

I had a ton of fun making this tank. I actually took this model even further and made a complete driver interior compartment as well. You may have seen that posted last week, but if you missed it you can check it out here.

How do you like the new creation, simple and effective? -MBG
Get 20% OFF Bits, and FREE SHIPPING??!! Over at the Spikey Bits Online Storeall bits are 20% OFF, and ship for FREE! We also have reduced shipping for overseas customers, as well as a special rate for shipping to Canada!
This entry was posted in Apocalypse, Apocalypse Datasheet, Blood Angels Playtest, Conversions, Space Marines, warhammer 40k. Bookmark the permalink.

Spikey Bits is a blog about the hobby of Warhammer 40k and Fantasy Battles, both tabletop wargames.